Archive | Repurpose It RSS feed for this section

Coffee Table-Turned-Bench

8 Jul

Back before I made this coffee table, this is what we were using for our coffee table in the living room. It’s your standard mission-style coffee table that I’ve owned for maybe 10 years or so. I wasn’t really crazy about the finish anymore (too reddish-orange), but I ran across a great idea on Pinterest to turn it into an enclosed bench. Bingo!


First, I flipped it over and unscrewed the top. I had originally put it together, so I knew it wasn’t too hard to take apart.



Next, I added two 1.5″ hinges to the corners of the table.



My plan was to paint the bottom white and add an upholstered cushion to the top. I purchased two sheets of white wainscoting (about $10 each) which would be enough to cover the four edges. With a little measuring and a lot of help from Ryan, we got the wainscoting cut to size.


I glued the wainscoting to the table for extra stability, then used our air nailgun to attach it further. Just wanted to make sure it wasn’t going to fall apart.


Quick…name the movie in the background…:)


I put a bead of white, paintable caulk in the corners to make sure it looked seamless.


Then,  primed and painted the legs and the wainscoting, even though it was already white. I just wanted to make sure the finishes were the same.DSC_0472

Next, I added 2″ foam to the top, and covered that with a layer of batting to smooth it all out.



I simply attached the batting by putting a thin line of hot glue just to make sure it stayed in place for when I stapled the fabric to the underside (I didn’t want a ridiculous amount of staples).

After some tucking and folding to get the fabric around the corners, we’re done! I just added a couple of pillows to make it feel like more of a window seat. Step by step, it was pretty easy to do.

After 4

 And I LOVE the extra storage for throw pillows and blankets…After 5

I have an extra matching side table that I’m making into another storage bench, but without the padded cover (it’s just going in a closet). I was driving by a rummage sale and spotted a similar-looking coffee table, and as tempting as it was to pick it up and make another to sell…I have too many other projects waiting for me. So, if you run across a second-hand mission-style coffee table, pick it up and try your own! Thanks for reading, and of course here’s another before/after with which to leave you…



Great Crate Table!

1 Feb

Ooh – I’m so excited to share this project with everyone!

Here’s a reminder of our previous living room setup and furniture from the console table:

Living Room with Old TV Console 2

At that time (back in November), we were waiting for our new couch and club chair to arrive. We sold the couch (which was mine from my single days) because it was not that comfortable, and the chaise because it was just too big for the space.

As far as the coffee table goes, I toyed with the idea of repainting or refinishing it because I’m not crazy about the orangey finish, but then I decided I didn’t really like the size of it anyway. It seemed a little too wide and a little too tall, and I wanted to open up the space of the living room. (I’ve got big plans for the coffee table. I don’t want to give anything away just yet, but let’s just say it won’t resemble a table by the time I’m done with it!) I still wanted a coffee table, because both Ryan and I like one for putting up our feet, setting drinks on, etc. I decided this was the perfect opportunity to build a new one. I had seen a couple of coffee tables on Pinterest made from craft store crates, and I liked the idea of it.

So, I collected my four crates here and there because I used a 40 or 50 percent off coupon on each one to save a little cash. Luckily, I work right across the street from JoAnn Fabrics so was able to pop in and get one now and then on a break or lunch. I ended up paying $7 or $8 for each crate.

Here they are – unfinished and ready to go:


Here is how they will be set up: IMG_0700

Next, I stained them a dark walnut. I only put one coat on, and I actually didn’t wipe much stain off at all because it pretty much all soaked right into the soft pine:


Once the stain was dry, I started the build by first nailing the crates together. Ryan told me that it was time to buy an air compressor and nail gun since it doesn’t seem like I’ll be slowing down on my projects (teehee), so off we went to the store to pick it up. Wow – it made it SO much easier than nailing by hand. I only used the nail gun to nail the thick ends together because the nail gun is pretty strong and would have probably blown right through the slats that make up the sides of the crates.


For extra stability, I hand-nailed the slats to the thicker ends.


With the crates sufficiently attached to one another, I moved on to the bottom brace. It’s kind of hard to get pictures of me measuring, running out to the garage to cut, then back in, down the stairs…and so on. So, here’s a little rundown.

I used about five 1″x4″x8′ boards to make up the bottom brace and the top (more on the top later). I didn’t get the expensive boards because I wanted a bit of a rustic look to the table (I even looked for boards with some good knots). Each board was only about $1.40. Below is a picture of how I wanted my bottom brace set up. It took lots of measuring and lots of cutting, but I finally got my two long pieces and four shorter pieces cut using a miter saw. I clamped them to the crates so they didn’t shift when I screwed them together using the metal brackets.


Once the brace was built, I stained the top side (metal brackets go on the bottom) because parts of it would show through the slats of the crates.


I attached the brace to the bottom of the crates and added some small casters to the bottom. We flipped it over to see what we had so far. Here’s an idea of the size of it (it’s about 28″x28″).


The crate tables I saw online stopped here for the most part; however, I knew that wouldn’t work for us because the wood slats are too thin to even put your feet on. So, I knew I wanted a top of some sort. Ryan helped me with logistics at this point because I started getting crabby and annoyed. Shocker, I know. 🙂 I could not figure out how to build the top! I cut nine boards about 19″ each so there would be a slight lip on the outside edge. We started attaching the boards from the center (using the nail gun) and building out.


Yay! We have a top. I broke out the electric sander to soften the edges and corners, make sure all the ends matched up, and smooth out the top ridges a bit.

IMG_0743I put one coat of stain on the top, then put two coats of water-based polycrylic on the whole thing (top and bottom).

But…I wasn’t done yet. That hole in the middle…it wasn’t going to be a hole for long! I put a shelf in there by nailing in some simple braces made out of scrap wood (about 1/2″x1/2″x8″):


…and Ryan cut an 8″x8″ shelf that I stained and varnished:


It sets right in:


Here it the finished product with our new couch and chair.


I have some decorative balls in the middle right now, but we could put remotes or coasters in there. Endless possibilities! Okay, not endless…but there’s lots and lots of possibilities. 🙂IMG_0826

Yep, we like it, AND you can put your feet on it! IMG_0828

Whew – I’m spent now. We love our new coffee table. The wheels on the bottom make it very convenient to push it out of the way if I need space in the living room to work on projects. It took a weekend to put together, but it was worth every minute. And you can’t beat the cost of $50 in materials (crates, boards, casters, brackets)!

So, who here has built a piece of furniture from no plans? Do tell! Seems to be my MO these days. Unlike the disaster I like to call the giraffe bench, at least this one turned out. 🙂