Working with Epoxy Resin

12 Aug

This resin desk is one of the coolest, yet most challenging project I’ve done so far.

A friend of mine had a stack of coasters that she and her husband had collected from a trip to Europe. They were just tucked away in a Ziploc bag, and after she saw my post about the Starbucks table, she was wondering if I could do something similar for her with the coasters. She was hoping to make them into a desk for her husband as a surprise for his birthday. I figured, how hard could it be? 🙂 Famous last words…

Here’s the desk that we started with (sorry; I didn’t assemble it after she brought me the desk, but you’ll see that it’s white, and it would end up black).

IMG_1116

This is the resin I used. I bought it at Lowe’s for about $24 a box.

DSC_0671

First, I primed all of the desk pieces with a black spray primer. After doing some testing with the resin on some other pieces, I decided that it was necessary to create a sort of “fence” to hold in the resin. After all, resin is first poured on in liquid form and cures to be hard, so somehow I needed to hold in the resin in. Tape didn’t work on my test pieces – the resin leaked out of the tape. So a fence it was. However, this fence had to stay put – I wasn’t going to remove it after the resin was cured. So it had to look like part of the desk.

I found some simple 3/4″ trim that had rounded edges on the top, and I had Ryan cut it to size for me. I glued it to the desk, then used the air nailer to make sure it was secure.

IMG_1117

I had some pretty sharp corners, so I hand-sanded those down to blend into the rounded corners of the desk.

IMG_1121

Next I filled the inside and outside seams with some paintable caulk. Even though the fence holds the resin in, it still needs to be “water-tight,” otherwise the resin would leak out (like it did with the tape).

The last thing I did before putting the desk back together and starting on the resin portion was painting the whole thing black. I used spray paint again, as there are lots of nooks and crannies on this desk, and spray paint ensured an even coat.

Okay – on to the fun part! We set up and arranged the coasters, and I glued them on using simple Elmer’s Glue All.

DSC_0462

After some intense leveling, we mixed up the first coat of epoxy resin and poured it on (there are two bottles that you mix together on a 1-to-1 ratio). There is one main thing to remember when working with resin – mix and mix some more! If you read the directions and follow them carefully, you’ll be fine. I overlooked one step, and that would come to bite me in the butt down the road – in a big way.

DSC_0468

Then pour… DSC_0470

We then used a combination of stick pins, a hair dryer and blowing on it with our own breath to bring the bubbles to the top. We had to deal with bubbles for quite awhile (I think we had an hour or so of working time before it started to cure up) because the coasters still had a bit of air under them when I glued them down.

One coat of resin didn’t quite cover the coasters, so after 3 days of cure time, we added another coat…and this is where I went wrong. I ended up scraping some of the last bits of resin out of the cup, and it hadn’t gotten completely mixed together. It all looked great until we came home after being gone for the weekend. There were a few sticky spots about 3″ in diameter. After some major panic, I contacted the company on the box and they assured me that I could sand down those sticky spots and flood the desk again. So, Ryan and I actually dug out the worst sticky spot with a razor blade and sanded that down along with the other spots, and boy did it look terrible! 🙂 It was very cloudy and I hoped and prayed that the 3rd coat of resin would clear it up as the company told me.

Turns out, they were right! The third and final coat cleared those sanded spots up like magic. It turned out beautifully, but it was a long road to get there! Both my friend and her husband like the desk, and that’s all that counts. 🙂

DSC_0561

DSC_0566

Advertisements

Coffee Table-Turned-Bench

8 Jul

Back before I made this coffee table, this is what we were using for our coffee table in the living room. It’s your standard mission-style coffee table that I’ve owned for maybe 10 years or so. I wasn’t really crazy about the finish anymore (too reddish-orange), but I ran across a great idea on Pinterest to turn it into an enclosed bench. Bingo!

IMG_1123

First, I flipped it over and unscrewed the top. I had originally put it together, so I knew it wasn’t too hard to take apart.

IMG_1124

IMG_1125

Next, I added two 1.5″ hinges to the corners of the table.

IMG_1130

IMG_1131

My plan was to paint the bottom white and add an upholstered cushion to the top. I purchased two sheets of white wainscoting (about $10 each) which would be enough to cover the four edges. With a little measuring and a lot of help from Ryan, we got the wainscoting cut to size.

DSC_0454

I glued the wainscoting to the table for extra stability, then used our air nailgun to attach it further. Just wanted to make sure it wasn’t going to fall apart.

DSC_0450

Quick…name the movie in the background…:)

DSC_0452

I put a bead of white, paintable caulk in the corners to make sure it looked seamless.

DSC_0460

Then,  primed and painted the legs and the wainscoting, even though it was already white. I just wanted to make sure the finishes were the same.DSC_0472

Next, I added 2″ foam to the top, and covered that with a layer of batting to smooth it all out.

DSC_0473

DSC_0474

I simply attached the batting by putting a thin line of hot glue just to make sure it stayed in place for when I stapled the fabric to the underside (I didn’t want a ridiculous amount of staples).

After some tucking and folding to get the fabric around the corners, we’re done! I just added a couple of pillows to make it feel like more of a window seat. Step by step, it was pretty easy to do.

After 4

 And I LOVE the extra storage for throw pillows and blankets…After 5

I have an extra matching side table that I’m making into another storage bench, but without the padded cover (it’s just going in a closet). I was driving by a rummage sale and spotted a similar-looking coffee table, and as tempting as it was to pick it up and make another to sell…I have too many other projects waiting for me. So, if you run across a second-hand mission-style coffee table, pick it up and try your own! Thanks for reading, and of course here’s another before/after with which to leave you…

Sarah-Bench-Before&After-v2